Nitto Tires JK Experience Alaska – Day 3

Tuesday Day 3

Muskeg – a North American swamp or bog consisting of a mixture of water and partly dead vegetation, frequently covered by a layer of sphagnum or other mosses.

After an easy day on Monday, we were all quick to realize why Monday was an easy day. During the morning’s driver’s meeting we were told that we were going to experience a mud like no other. A mud that us lower 48’ers have no experience with, a mud called muskeg.

Airing down the Jeep before what would be a challenging muddy day.

Airing down the Jeep before what would be a challenging muddy day.

We would be traveling the Stampede Trail made famously by the mid 1990’s book and later a movie, Into the Wild. The trail began as most off road trails, a mild unapproved road.

We crossed many small water holes along with a few small creek crossings before reaching the hard section, the muskeg.

We crossed many small water holes along with a few small creek crossings before reaching the hard section, the muskeg.

We crossed many small water holes along the way with a few small creek crossings before reaching the hard section, the muskeg.

Muskeg - A North American swamp or bog consisting of a mixture of water and partly dead vegetation, frequently covered by a layer of sphagnum or other mosses.

Muskeg – A North American swamp or bog consisting of a mixture of water and partly dead vegetation, frequently covered by a layer of sphagnum or other mosses.

The ARB Jeep Wrangler JK was pretty far forward in the pack so although challenging, the ARB JK only got stuck on the final muskeg hole and required us using our Warn Zeon 12-S winch.

The ARB JK was pretty far forward in the pack so although challenging, the ARB JK only got stuck on the final muskeg hole and required us using our Warn Winch.

The ARB JK was pretty far forward in the pack so although challenging, the ARB JK only got stuck on the final muskeg hole and required us using our Warn Winch.

Once all the Jeeps were through the muskeg, the trail improved with no recovery required the remainder of the way to the fast flowing Teklanika River. If you have read the book or watched the movie Into the Wild, the Teklanika River is the river that the main character, Christopher McCandless found impassible while trying to leave the area due to a lack of food. The locals say that the river is passible by vehicles and by foot during the early spring river level. When we reached the river, the water was flowing fast and high forcing us to turn around and retrace our tracks.

We stopped for about 45 minutes and enjoyed our packed lunch next to the Teklanika River.

We stopped for about 45 minutes and enjoyed our packed lunch next to the Teklanika River.

After a short lunch break along the river it was back in the Jeeps heading towards the trailhead. Retracing our tracks back to the trailhead also meant that we would have to cross the muskeg section once again, but this time after 14 Jeep pushed through it earlier. As imagined, the conditions were a lot more difficult than the first pass requiring a majority of the Jeeps to be recovered from the almost alive muskeg, including the ARB Jeep JK requiring it’s Warn Zeon 12-S winch several times.

The ARB Jeep Wrangler JK Unlimited navigating the Muskeg a second time.

The ARB Jeep Wrangler JK Unlimited navigating the Muskeg a second time.

After an eventful day of off-roading, it was back on the pavement on the way to our night’s stay in Fairbanks to clean up the Jeep and stock up for the next day’s adventure.

The end of the Stampede trail.

The end of the Stampede trail.

That night, we found out that the next day’s adventure would be to drive to the most northern part of North America that can be reached by car, Deadhorse – Prudhoe Bay.

Click here for Day 4 & 5 of the Nitto Tires JK Experience Alaska

Project Quicksand – Nitto Tires JK Experience Alaska

Project Quicksand – The speed (quick) in which the new ARB Mojave (sand color) Jeep Wrangler JK was built. When we were contacted by JK Experience about being sponsor of the Nitto Tires JKX Alaska 2016, we jumped at the opportunity to be involved and showcase the capability of a kitted out ARB Jeep Wrangler JK Unlimited built completely with bolt on components. This would prove that you can build a capable vehicle that could conquer some very rugged terrain without fabrication or welding skills.

Traditionally JKX information is very limited and 2016 wasn’t any different. Leading up to the event we were given some basic information that would require some planning.

IMG_9206

Fuel was a major concern with this trip. As you can see most opted to bring extra fuel via a Rotopax container.

The first and most important is fuel. We were informed that we would be required to have at least a 300 mile fuel range during the trip. This would require the installation of an auxiliary fuel tank system or the ability to carry fuel via jerry cans. The second important piece of information was that we would need to be self sufficient and be able to pack food, clothing, tools and spare parts for 7 days worth of travel. In the past, participants of JKX would be required to camp several nights of the trip, but because of the uncertainty of Alaska weather and wildlife along with needing spare empty seats for media members, we would be spending every night in a hotel or “hotel like” facility.

May 2015 - Grand Canyon - AZ ARB Photo Shoot - Taco, Jeep

We felt that our our overland themed 2012 Jeep Wrangler JK Unlimited wasn’t aggressive enough for the possible Alaskan terrain were might encounter on the trip.

We already had two JKs in the ARB fleet, a very capable 2010 2-door at our Seattle location and an overland themed Unlimited at our Florida location. Obviously the 2-door’s storage capacity would hinder the ability to carry all the required items of the trip as well as having an open seat for a media member. Our red overland themed 2014 Jeep Wrangler JK Unlimited would easily meet the cargo space requirements and with the already installed Rhino roof rack, securing fuel containers would be an easy task.

20140414_Falken_Dynatrac_run_061

Our 2010 Jeep Wrangler was plenty aggressive enough to conquer the Alaskan terrain on the trip, but was not a viable option due to the lack of interior cargo space.

As mentioned above, information is very limited leading up to the event and pretty much a need-to-know basis. We would not know what kind of terrain we would be encountering until each day of travel. The day could be all paved roads, it could be all dirt roads or very technical off-roading. We wouldn’t not know until the drivers meeting the morning of travel. Because of this, we determined that our overland themed JK would not be aggressive enough for the Alaskan terrain.

So the decision was made to purchase and outfit a more aggressive but overland capable Jeep Wrangler JK Unlimited for the trip. After scouring the classified ads for a clean, used Wrangler Unlimited it was determined that it was more cost effective to purchase a brand new vehicle.

untitled-37

Our brand new 2016 Jeep Wrangler JK Unlimited Sport as we were picking it up from the dealership.

After a week of deciding on a color and searching the local dealer listings, we found our Jeep, a basic, no power options 2016 Mojave Jeep Wrangler Unlimited Sport. And with that, project Quicksand was born. The Jeep was purchased on the late afternoon of Wednesday July 13th with the departure deadline of Monday July 18th to arrive in Anchorage by the event’s check-in date of Saturday July 23rd. In other words, this was going to be a very quick, but doable build.

untitled-7

Dana Spicer Ultimate Dana 60s were provided to us for this project seen here with the ARB Air Locker installed.

untitled-3

Dana Spicer Ultimate Dana 60s were provided to us for this project seen here with the ARB Air Locker installed.

First things first. Dana Spicer sponsored the build with front and rear Dana Ultimate 60s which we had already loaded up with a couple of ARB Air Lockers in preparation of being installed under our new Jeep. With these new axles, we would need to different length driveshafts that were sponsored by Tom Wood’s Driveshaft. To order the correct length, the suspension and Dana 60 axles would need to be installed to measure for the correct length.

13690772_10154400182439571_328909029726531156_n

Factory axles out, Dana Spicer Ultimate Dana 60s ready to go in.

With the new axles (bolt pattern) and the mud that we new we were going to encounter, new wheels were required. Our friends over at TR Beadlocks donated a set of their beadlock wheels. These wheels mated with Nitto Trail Grappler Mts proved to be a perfect combination while in Alaska. To make sure we had enough clearance for the new Nitto Tires, MCE Fenders were installed front and rear.

The Jeep was purchased on the Wednesday night, this meant that the factory axles and suspension would need to be removed and the new Dana 60’s along with the Old Man Emu 4” suspension with the new BP-51 Internal Bypass shocks would need to be installed by the following morning (Thursday) to ensure that the driveshafts could be made and shipped overnight for the installation and differential gear break-in over the weekend.

IMG_9372

New front and rear driveshafts were provided by our friends over at Tom Wood’s Driveshaft.

The Jeep teardown started at 4:30PM, the suspension (springs, shocks, control arms) and axles were in and the Jeep was on the ground by 10PM that night ready for driveshaft measurements.

Checking suspension clearances after rolling it out of the shop.

Checking suspension clearances after rolling it out of the shop.

After several days of hard work, the Jeep was completed that Sunday morning and was out on the local roads adding a few miles to the new differential gears.

IMG_0485

Ready for the day’s test drive and differential gear break-in.

With the build complete and the differential oil changed, it was time to hit the road in our completely bolt-on ARB accessorized Jeep Wrangler JK Unlimited for a 2200 mile journey from Seattle to Anchorage to the official Nitto Tires JKX Alaska 2016 checkin.

Special thanks to Mike at MCE Fenders for coming down to the shop on his day off to install the MCE Fenders and work on other parts of the Jeep.

Complete build included:

ARB Product:
– ARB Front Stubby Bar
– ARB Intensity LED AR21 lights
ARB Under Vehicle Protection
ARB Rock Sliders
Rear Bumper and Tire Carrier (modified for 8 lug wheels)
– OMEJK4BP51 4” suspension system with OME BP-51 Internal Bypass Shocks & ARB Control Arms
– Front and rear 35 spline ARB Air Lockers
– ARB Twin Compressor with Manifold
– ARB Inflation Kit
– Safari Snorkel
– ARB Breather Kit
– ARB 50QT Fridge Freezer with Loom
– ARB Recovery Kit: RK9, additional winch extension strap, ground anchor
– IPF H4 Headlamp Lenses and IPF H4 LED Bulbs

Non ARB Product:
MCE Front and Rear Fenders
Front and Rear Dana Spicer Ultimate Dana 60s (8-lug)
Tom Wood’s front and rear drive shafts
TR Beadlock wheels
37” Nitto Trail Grappler MT tires
Rhino Rack Backbone roof rack
Rotopax w/lockable mounts
Maxtrax w/mount system
Grab Bars
Cobra CB C75 WX ST
Teraflex under seat compressor bracket
AEV Procal

Click here for Day 1 & 2 of the Nitto Tires JK Experience Alaska

ARB Air Locker Static Torque Failure Test

Ever wonder how ARB 4×4 Accessories lab tests the ARB Air Locker selectable locking differential to mimic extreme shock loads ? Watch the video to find out.

To see if an ARB Air Locker is available for your vehicle, visit the ARB vehicle application guide — Vehicle Application Guide

Find your nearest ARB Air Locker distributor —ARB Dealer Locator