ARB Off Road Icons Project Update: Toyota FJ40 & Nissan Patrol GQ

Our team has been pretty busy lately prepping the ARB Off Road Icons Toyota Land Cruiser FJ40 and Nissan Patrol GQ for upcoming shows and to cross the Simpson desert in a few months. Check out all the mods the team in Australia performed to both vehicles in the videos below.

To learn more about the ARB Off Road Icons project, please visit – http://icons.arb.com.au

Toyota Land Cruiser FJ40

Nissan Patrol GQ

New Product: ARB Kakadu Roof Top Tent

ARBKakadu_ARB4101A copy

DESIGN & DEVELOPMENT:

The new Kakadu model tent is a new addition to the successful range of ARB Touring products. It shares many features and components with the Simpson model but has been designed for simpler set up and warmer climates where maximum ventilation is required.

While it shares many of the frame components with the Simpson III, the Kakadu does not include the extendable veranda section. This makes the Kakadu ideal for fitment to the rear of utility/pick-up vehicles and trailers where the floor level can be mounted lower to the ground with no access issues to the tent.

For increased ventilation, the Kakadu features larger side window openings without the canvas awning over the window exterior. This allows for greater air flow through the tent but also increased view and natural light. Internal canvas shutters are still fitted to seal the windows during inclement weather. To provide rain cover to the window, the fly sheet has been extended and provides more protection to the entire tent.

Also new to the Kakadu is a lighter high density, single layer extruded foam mattress. This reduces the overall weight of the tent and allows for easier folding of the tent during pack up.

STRUCTURE: 

Utilizing the same materials as the Simpson model, the Kakadu also has an ABS laminated aluminum ladder framed base for superior floor strength & polystyrene in fill panel insulation which helps to reduce under mattress condensation.

Roof support bows are manufactured from 25mm OD anodized aluminum tube which gives the entire tent structure greater stability in adverse weather conditions.

4mm plated steel hinges along with extruded aluminum tongue & groove base edges ‘lock’ the bases together when erected to ensure minimal flex and superior strength.

CANVAS: 

As with all canvas products in the Series 3 range, the Kakadu features 300 gsm Poly/cotton Rip Stop canvas with PU (polyurethane) coating for superior water resistance. The PU coating also helps prevent condensation from permeating through the canvas and is easily wiped dry and clean, reducing the likelihood of mildew and staining. This material also meets current fire retardant standards.

Offroad Images Studio Photography

All seams are sealed with welded seam tape to prevent water ingress through thread stitching holes. This also negates the need to season (wet down and dry repeatedly) before initial use like most canvas products.

Doors and windows are fitted with quality insect screen mesh that can be rolled open when not required.

FLY SHEET: 

The fly sheet is manufactured from 300D Oxford weave polyester. This coupled with a PU coating means the fly sheet is virtually impervious to water making the Kakadu exceptionally dry in wet conditions.

Offroad Images Studio Photography

The fly sheet uses 8 spring steel bows to keep it taught and reduce flapping in windy conditions.

MATTRESS: 

The Kakadu features an extruded high density single layer mattress to reduce the overall tent weight and to assist with folding the tent during pack up. The removable mattress cover is manufactured from 300D oxford weave polyester for easy cleaning and prevents moisture from penetrating the mattress foam.

Kakadu_11

By having two mattress types in the Series 3 range, customers can now purchase the denser chip foam mattress supplied in the Simpson model if a firmer mattress is preferred.

COVER: 

The cover on the Kakadu is the same upgraded model seen on the Simpson tents. Utilizing the heavy duty #10 YKK Vislon type zipper and three tie down straps, the cover resists billowing and is less prone to wear and tear.

Offroad Images Studio Photography

Manufactured from UV stabilized 900gsm laminated PVC, all seams are externaly welded for strength and to seal against water ingress.

LADDER: 

The ladder is also the same as the Simpson model and has a durable anodized finish. Ladder extensions are available if the tent is fitted to taller vehicles. If the tent is fitted to a utility/pick up or trailer, one main ladder section can be removed if required and the optional short extension can be added to adjust to the perfect length.

Offroad Images Studio Photography

WEIGHT AND DIMENSIONS: 

Shipping weight (In Carton):
Tent – 142 pounds
Ladder – 13 pounds

Assembled weight (including ladder and mounting rails): 130 pounds

Dimensions (approx):
Erected – 55” W x 94.5” L x 51” H
Packed – 55” W x 47.25” L x 8” H

ARBKakadu_0068