2005+ Toyota Tacoma OME BP-51 Internal Bypass Suspension System

Complete 2005+ Toyota Tacoma BP-51 Suspension Kit (OMETAC16BP51B)

Complete 2005+ Toyota Tacoma BP-51 Suspension Kit (OMETAC16BP51B)

Old Man Emu is pleased to release the latest application of BP-51 high performance bypass shock absorbers engineered specifically for the Toyota Tacoma.

Although there are subtle weight differences between the last generation Tacoma and the new generation, with the adjustable nature of the BP-51 the OME engineers have been able to tune and design the BP-51 package to suit both applications. This package consists of 2 front coilovers, 2 rear shock absorbers and 2 fit kits.

The front coilovers have been tuned in both length and feel specifically to the Tacoma and are capable of accommodating setups with and without accessories (bumpers, winch, etc). Specific reservoir brackets have been designed for application specific reservoir placement and also relocation of the sway bar to allow clearance at the spring seat. While the coilovers are adjustable in height, the system has been designed for a 2″ (50mm) ride height increase and a minimum of 2″ (50mm) down travel.

BP-51-V2-shield_web

Rear shock absorbers have been tuned in length and valving specific to the Tacoma. To accommodate the large body size of BP-51 a specific lower mount bracket has been developed to provide clearance to the axle. Specific reservoir brackets have also been developed and are included in the rear fit kit. The rear dampers are tuned to match the existing range of rear Old Man Emu leaf springs.

Recommended compression and rebound settings can be found in the supplied fitting instructions for the various spring options available. The fitting instructions include detailed information for correct installation of the shock absorber and reservoir placement.

Read the entire press release here >>

Want to learn more about the OME BP51 development? Watch the video below.

Put some spring in your ride and receive up to $150 in Visa Gift Card Rebate

Put some spring in your ride and receive up to $150 in Visa Gift Card Rebate.

Purchase an ARB Old Man Emu suspension kit between March 1, 2016 and April 30, 2016 for up to $150 in Visa Gift Cards. Rebate form must be submitted by May 31, 2016 in order to be eligible.

ARB Old Man Emu Suspension Systems

Unlike many other aftermarket suspensions that target a certain lift height, ARB’s Old Man Emu suspension systems are designed to be a fully integrated system that improves a vehicle’s performance, load carry capacity and handling. This is done by providing different shock valving and spring rate options to create a matched set of components that are engineered to work together to create the best ride and handling for everything from a stock daily driver pickup to a long-distance overland rig.

  • * Application specific
  • * Engineered for on and off road drivability
  • * 3 year / 35,000 mile warranty
  • * Manufactured in Australia

 

The following part numbers qualify for a $100 Rebate:
OMEJK4DLKS – JK 4-Door Light kit
OMEJK4DHKS – JK 4-Door Heavy kit
OMEJK2DHKS – JK 2-Door Heavy kit
OMETJLKS – TJ 1997-06 Light Kit
OMETJHKS – TJ 1997-06 Heavy Kit
OMEFJC10LKS – 2010+ FJ Cruiser Light Kit
OMEFJC10HKS – 2010+ FJ Cruiser Heavy Kit
OMEFJCLKS – 2007-09 FJ Cruiser Light Kit
OMEFJCHKS – 2007-09 FJ Cruiser Heavy Kit
OMEWJLKS – WJ Light Kit
OMEWJHKS – WJ Heavy Kit

The following part numbers qualify for a $125 Rebate:
OMETAC04LKS – Tacoma 1998-2004 Light Kit
OMETAC04HKS – Tacoma 1998-2004 Heavy Kit
OMETAC05LKSB – Tacoma 2005-15 Stock Kit
OMETAC05HKS – Tacoma 2005-15 Heavy Kit
OMETUN57LKS – Tundra 2007-14 Stock Kit
OMETUN47LKS – Tundra 2007-14 Stock Kit
OMETUN47HKS – Tundra 2007-14 Heavy Kit
OMEJK4 – JK 4″ kit

The following part numbers qualify for a $150 Rebate:
OMEF25011LFT3K – F250-350 3″ Lift Kit 2001-15
OMEF25008LFT3K – F250-350 3″ Lift Kit 2008-10
OMEF25011LFT4K – F250-350 4″ Lift Kit 2011-15
OMEF25008LFT4K – F250-350 4″ Lift Kit 2008-10
OMEFJC10HKBP51 – BP-51   2010-14 FJ Cruiser Kit Heavy
OMEFJC10LKBP51 – BP-51    2010-14 FJ Cruiser Kit Light
OMEJK4BP51 – BP-51 Jeep JK Kit

Rebates will be processed in 8-10 weeks from receipt of form submission.

 

 

To redeem, please complete the form below.

Details
This offer is valid only for ARB Old Man Emu suspension kits purchased in the United States and Canada between 3/1/2016 and  4/30/2016. Offer valid for US and Canada residents only. Offer limited to one rebate per receipt. This offer cannot be combined with any other offer. Incomplete or illegible submissions will be denied, so take your time writing. PROOF OF PURCHASE IS REQUIRED for all models. Rebates that do not include proof of purchase will be rejected. Requests with an invalid or undeliverable address will be denied. Clubs, groups, organizations, resellers or associations are not eligible. Please allow 8-10 weeks for delivery. Offer sponsor and service provider are not responsible for lost or misdirected mail. No claims against ‘lost’ materials can be honored unless accompanied by proof of receipt. Please retain a copy of all documentation. Original materials become the property of the offer sponsor and will not be returned. Reproduction of UPC barcode nullifies offer. This offer will not accept further processing activity 4 weeks from the last valid purchase date. If you have not received your rebate within 12 weeks please contact marketing@arbusa.com. Fraudulent submissions could result in federal prosecution under mail fraud statutes (Title 18 USC Sections 1341 & 1342). For information regarding the status of your rebate claim, call 425-264-1391.

OME BP-51 High Performance Bypass Shock Absorbers

ARB RELEASES NEW HIGH PERFORMANCE OME BP-51 BYPASS ABSORBERS

AFTER 4YEARS IN DEVELOPMENT, ARB CORPORATION LTD IS EXCITED TO ANNOUNCE A REVOLUTIONARY A NEW SUSPENSION SYSTEM, THE OME BP–51 HIGH PERFORMANCE SHOCK ABSORBERS.

ARB 4×4 Accessories, the company that revolutionized the 4×4 world with the Air Locker selectable differential, has now transformed the suspension world with the introduction of the Old Man Emu BP-51 High Performance Bypass Shock Absorbers. Bringing racing technology to your adventures, the OME BP-51 shock absorbers feature revolutionary, patent-pending technology developed by the Old Man Emu engineers to deliver unparalleled on and off road performance.

ARBOME_BP5190001_12-Edit

ARB OME BP-51 High Performance Internal Bypass Shock Absorbers

Developed and tested extensively in some of Australia’s most rugged environments, these big bore, position sensitive bypass shock absorbers with remote reservoir are designed to be fitted without any need for vehicle modification. This design combines considerable ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off road. In addition to the velocity sensitive damping which used in most shock absorbers, where the faster the piston moves, the higher the level of damping is generated, BP-51 shock absorbers also generate damping dependent on the position of the piston within the shock absorber’s body via their internal bypass design.

ARBOME_BP5190001L_07-Edit

ARB OME BP-51 High Performance Internal Bypass Shock Absorbers

This bypass design results in an ability for the shock absorber to provide the best of both worlds, a comfortable and compliant ride during normal driving and a more controlled ride over challenging terrain. With greater levels of damping generated at each end of the stroke, the piston slows as it approaches full compression and extension, preventing harsh topping out against the bump stop and allowing large bumps and corrugations to be easily absorbed.

Damping performance is easily adjustable across a wide range in both rebound and compression, allowing the user to alter the vehicle’s ride performance and cater for different road conditions and vehicle loading scenarios.

ARBOME_BP5160003_12-Edit

ARB OME BP-51 High Performance Internal Bypass Shock Absorbers

The body, reservoir and components are all made from aircraft grade (6061 T6) aluminum, with a type 3, 40 micron hard anodized finish, ensuring exceptional heat dissipation and resistance to corrosion and stone damage.

ARBOME_BP5190001_01-Edit

ARB OME BP-51 High Performance Internal Bypass Shock Absorbers

Designed, developed and tested entirely by ARB’s team of Old Man Emu Ride Engineers, all BP-51 shock absorbers are manufactured in-house by ARB. In order to achieve this, significant investment has been made in state of the art machinery and hard anodizing equipment, allowing ARB total control of the manufacturing process to ensure the highest possible quality.

Shock absorber and coil over assemblies will be competitively priced with vehicle specific fitting kits at an additional cost. These fitting kits will allow the mounting of the external reservoir in vehicle-specifc location, creating a clean and straightforward solution to a traditional challenge of other reservoir systems.

ARBOME_BP51_VM80010001-Edit

The coilover applications come pre-loaded with the appropriate coil spring and are adjusted to the proper height for vehicles equipped with a bumper and winch (heavy load). If a vehicle does not have additional weight on the front end, the preload on the springs can be adjusted to the appropriate levels. ARB recommends that this is done using the BP- 51 Spring Compressor Tool (VM80020001). Some applications will have side specific part numbers (left/right) due to the location of the external reservoir.

In North America, the initial applications of Jeep JK Wrangler, FJ Cruiser (2010-2014), Toyota 200 Series and HiLux 2005+ will be available late summer 2015 with other applications rolled out in the months following. Soon to be released applications will include the Toyota Tacoma, Toyota 4Runner (2010+), and Toyota FJ Cruiser (2007-2009).

FEATURES:

  • Bypass technology with remote reservoir
  • Vehicle specific applications
  • Independently adjustable for both rebound and compression
  • Hard anodized, aircraft grade (6061 T6) aluminum body, reservoir and components
  • Adjustable spring preload/ride height adjustment
  • High pressure nitrogen reservoir with aluminum, anodized floating piston
  • 19mm hard chromed ground shaft with impact resistant, replaceable shaft guard
  • Dash 6 high temperature Teflon® hose with high flow fittings
  • Large Teflon® line spherical bearings on coilover applications
  • Each coilover comes pre-loaded with a coil, set to the appropriate height for bumper/winch combination

Read the full press release here–>>